There are currently no product reviews.
Sweet! I won the item on eBay and couldn't adjust the geometry or even keep a steady picure. This guide has the full schematics (not available anywhere else as far as I could tell), and was a bargain for the wealth of knowledge it contains. I hooked it up to my testing equipment, tweaked a few potentiometers and got it playing videogames in no time. Thanks!
It was just what I need to fix my old BMW's CD player. Very convenient also. Thank you.
Great Manual! It contains all the wiring schematics and mechanical exploded views that are essential for service and repair. I was surprised I even found this for such an old machine. Only wish I knew of this site many years ago.
Great manual very clear copied. You are making an incredible job. I appreciate a lot the rapidity and your efficiency. Thanks a lot
Good pdf of the service manual for this unit. Includes disassembly instructions, full schematics, board layouts, parts lists and diagnostic information. Some information is in the pdf twice (single pages, and split pages), but that could be how it was originally generated by panasonic, or perhaps the idea is to make it eaiser to put onto 8.5 x 11" pages.
Information was exactly what I needed. Delivery was overnight (less than 12 hours) and I was happy with the process.
Joint2 (Bottom side)
Removing the heat sink & amp. board (See Fig.8, 11 and 12)
Prior to performing the following procedure, remove the metal cover and the CD changer unit. 1. Disconnect the card wire from the connector ACW1 and the harness from the connector ACW2 on the amp. board. 2. Remove the four screws I attaching the heat sink cover to the rear panel. Remove the heat sink cover. 3. Remove the four screws J attaching the heat sink and two screws K attaching the speaker terminal to the rear panel. 4. After moving the heat sink upward, remove the claws. Then pull out the heat sink & amp. board inward.
Heat sink cover
Removing the tuner board (See Fig.12 and 13)
Prior to performing the following procedure, remove the metal cover. 1. Disconnect the card wire from the connector CON01 on the tuner board. 2. Remove the two screws L attaching the tuner board to the rear panel.
L N K
Removing the eco board (See Fig.12 and 13)
Prior to performing the following procedure, remove the metal cover, CD changer unit and heat sink & amp. board. 1. Disconnect the power cord from the connector PJ2 on the eco board. 2. Disconnect the harness from the connector PJ3 and RCW5 on the eco baord.
Rear panel Eco board
3. Remove the two screws M attaching the eco board to the rear panel. Tuner board
Removing the rear panel
RCW5 PJ2 PJ3 Main board CON01
Prior to performing the following procedure, remove the metal cover, CD changer unit, heat sink & amp. board and tuner board. 1. Remove the two screws N and three screws O attaching the rear panel.
Complete owner's manual in digital format. The manual will be available for download as PDF file aft…