Very good service, fast downloads and good manuals.
Text excerpt from page 9 (click to view)
Removing the front panel assembly (See Fig.11 and 12)
Prior to performing the following procedures, remove the top cover. Also remove the CD changer unit. 1. Disconnect the parallel wire and card wire from the connectors CN1101,CN901,CN901A and CN901B on the power amp and supply PCB. 2. Remove the two screws "G" retaining the front panel assembly onto the bottom of the body. 3. Remove the screw "H" retaining the cassette deck mechanism and then remove the GND lug "b" that comes from the power amp and supply PCB. 4. Disengage the claws "c" on both sides at the bottom of the front panel assembly and then remove the assembly.