|
Who's Online
There currently are 5706 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
n Removing the CD pickup (See Fig.18)
n
Prior to performing the following procedures, remove the top cover and both sides board. Also remove the CD changer unit. Also remove the CD changer mechanism.
n n
1. Widen the section "f". 2. While keeping the section "f" wide open, push the section "g" in the direction of the arrow to remove the shaft, and then remove the CD pickup.
n Replacing the loading motor and rotor belt
of the CD changer (See Fig .19)
n
Prior to performing the following procedure, remove the top cover. Also open the CD changer tray.
n
1. Remove the two screws "L" retaining the CD changer tray loading motor. 2. Remove the two screws "M" retaining the gear plate and take it out, after remove the rotor belt from the pulley.
nReplacing the CD turn table and removing the motor (See Fig. 20 and 21)
n
Prior to performing the following procedures, remove the top cover. Also remove the CD changer unit.
n
1. Remove the one screws "N" retaining the CD (Turn table). 2. Remove the two screws "O" retaining the stopper brackets on both sides of the CD changer unit. 3. Remove the stopper brackets from both sides of the CD changer unit. 4. Pull out the CD tray from the CD changer unit, all the way and lift the tray (u/~ ward) to remove. 5. Remove the gear and after push out the tray motor locker and pull out the tray motor from the CD tray.
1-12
$4.99 MX-K30 JVC Circuit Diagrams Set of circuit diagrams. The diagrams will be provided as PDF file. The file will be delivered after… $4.99 MX-K30 JVC Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft… $4.99 MX-K30 JVC Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
|
|
> |
|