|
Who's Online
There currently are 5779 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Very good manual. Plenty of service information including alignment instructions. Clear circuit diagram. Excellent, thank you.
;
Good morning, the service manual you sent me was perfect.
Your service and answering are excellent.
I recomend this service.
Best regards.
;
I had been looking everywhere for a proper service manual for this VCR. Everywhere else that has this available for download has a very light version. This is the full service manual with all aspects that would interest anyone looking for the service manual for the AIWA HV-MX100 Worldwide VHS VCR. Great quality (as always). A winner hands down. Best Quality.
;
Top quality manual. Covers all aspects you'd expect in a top quality service manual for this Panasonic VHS VCR. The manual resolution is high. Another top quality manual from the only site worth downloading manuals from! If you're looking for a manual for the PV-9662 VHS VCR, this is the one you'll want to get!
;
complete part-lists and pcb layout, schematic diagram is good enlargable,
3.1.11 REMOVING THE PWB IN PDP UNIT 3.1.11.1 REMOVING THE SMPS PWB (Fig.4 )
3.1.11.6 REMOVING THE Y-BUFFER L PWB (Fig.4 )
� Remove the PDP UNIT.
(1) Disconnect the connectors [CN8002], [CN8003], [CN8004], [CN8006], [CN8007], [CN8008], [CN8009] from the SMPS PWB. (2) Remove the 8 screws [V], and remove the SMPS PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
� Remove the PDP UNIT.
(1) Disconnect the connectors [CN5501], [CN5502], [CN5503], [CN5504], [CN5505],[CN5506] from the YBUFFER L PWB. (2) Remove the 5 screws [a], and remove the Y-BUFFER L PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
3.1.11.2 REMOVING THE X-MAIN PWB (Fig.4 )
� Remove the PDP UNIT.
3.1.11.7 REMOVING THE E-BUFFER PWB (Fig.4 )
(1) Disconnect the connectors [CN4001], [CN4002], [CN4003], [CN4004], [CN4005] from the X-MAIN PWB. (2) Remove the 8 screws [W], and remove the X-MAIN PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
� Remove the PDP UNIT.
(1) Disconnect the connectors [CN401], [CN806], [EC1], [EC2], [EC3],[EF1] from the E-BUFFER PWB. (2) Remove the 6 screws [b], and remove the E-BUFFER PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
3.1.11.3 REMOVING THE Y-MAIN PWB (Fig.4 )
� Remove the PDP UNIT.
(1) Disconnect the connectors [CN5001], [CN5002], [CN5003], [CN5004], [CN5005],[CN5006], [CN5007], [CN5008] from the Y-MAIN PWB. (2) Remove the 7 screws [X], and remove the Y-MAIN PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
3.1.11.8 REMOVING THE F-BUFFER PWB (Fig.4 )
� Remove the PDP UNIT.
(1) Disconnect the connectors [CN402], [FC4], [FE1], [FG1], from the F-BUFFER PWB. (2) Remove the 4 screws [c], and remove the F-BUFFER PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
3.1.11.4 REMOVING THE LOGIC-MAIN PWB (Fig.4 )
� Remove the PDP UNIT.
3.1.11.9 REMOVING THE G-BUFFER PWB(Fig.4 )
(1) Disconnect the connector [CN8008] from the SMPS PWB. (2) Disconnect the connector [CN4002] from the X-MAIN PWB. (3) Disconnect the connector [CN5001] from the Y-MAIN PWB. (4) Disconnect the connector [CN401] from the E-BUFFER PWB. (5) Disconnect the connector [CN402] from the F-BUFFER PWB. (6) Disconnect the connector [CN403] from the G-BUFFER PWB. (7) Remove the 6 screws [Y], and remove the LOGIC-MAIN PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
� Remove the PDP UNIT.
(1) Disconnect the connectors [CN403], [GC5], [GC6], [GC7], [GF1] from the G-BUFFER PWB. (2) Remove the 6 screws [d], and remove the G-BUFFER PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
3.1.11.10 REMOVING THE VIDEO SMPS PWB (Fig.4 ) � Remove the PDP UNIT. (1) Disconnect the connectors [CN9005], [CN9006], [CN9007] from the VIDEO SMPS PWB. (2) Remove the 4 screws [e], and remove the VIDEO SMPS PWB. NOTE:
3.1.11.5 REMOVING THE Y-BUFFER U PWB (Fig. 4)
� Remove the PDP UNIT.
(1) Disconnect the connectors [CN5401], [CN5402], [CN5403], [CN5404], [CN5405],[CN5406] from the YBUFFER U PWB. (2) Remove the 5 screws [Z], and remove the Y-BUFFER U PWB. NOTE: � It is advisable to take note of the connecting location (connector number) of the removed connectors.
� It is advisable to take note of the connecting location
(connector number) of the removed connectors.
1-14 (No.YA013)
|
|
|
> |
|