Last week I bought a second hand BAUKNECHT TRK4850 DRYER. It is a professional machine with many programs and switch options. I feared it would be a huge quest to find a manual. I was delighted when I found owner-manuals.com. After payment I received the file to download the next day already. The quality is great. I am very happy. Thanks!
but kindly the distributions of the operating programs not find in the owners manual,can you help me to understand the operating programs instructions thank you
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
Text excerpt from page 25 (click to view)
TROUBLESHOOTING
What appears to be trouble is not always serious. Make sure first ... 1 Power cannot be turned on. * Is the power cord unplugged? 2 When the 2 PLAY button is pressed, tape does not move. * Is the 8 PAUSE button pressed? 3 Playback sound is at a very low level. * Are the batteries run down? * Is the head dirty? 4 The ¶ REC button does not function. * Have the safety tabs of the cassette been broken off? * Is a cassette loaded? 5 The disc is loaded but does not play. * Is the disc upside down? * Is the disc dirty? * Is the disc damaged or warped? * Is the lens dirty? * Is there lens condensation? If so, set the (on/ off) button to the on position and wait one or two hours before use. 6 No sound from the speakers. * Are headphones connected? 7 Since tape speed is irregular, wow and flutter occur. * Is the pinch roller or capstan dirty? * Are the batteries run down? 8 Radio reception is poor and there is much static. * Is the antenna properly adjusted? 9 Remote control is impossible. * Are the batteries in the remote control unit exhausted? * Is the remote sensor section exposed to bright light (direct sunlight, etc.)? Note: When the unit is moved from a cold place of around 0�C to a warm place, it may not operate normally, because moisture has formed inside the deck. Normal operation will be restored after waiting one or two hours.