|
|
|
Who's Online
There currently are 5764 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
- Very good scan quality, PERFECT!
- Sehr gute scan Qualitaet, empfehlenswert!
Wolfgang Sundhaus
 ;
Good site, works ok and you get what you order, no problems experienced, got my manual within a day. A++++
;
Original well scanned manual. Got the job done. Microwave problem found & corrected. For $5 and a new magnitron from ebay, it was a cheap and good the first shot fix. Electrical schematics allowed me to mage sure every thing else was ok before cutting and order for parts. Hard to live without.
;
I was very skeptical of this website, I have never downloaded manuals before. I put it on the AMEX and payed through Paypal to ensure protection. I got the manual exactly as described and now I can replace the filter capacitor for this amp. Great Price, others selling for 12.99 or more and this is the same manual. I will search out this website for other manuals. Thank you
;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
RX-5030VBK
2.9 Removing the heat sink (See Figs.10 and 11) � Prior to performing the following procedure, remove the top cover and main board. (1) Remove the ten screws L attaching the heat sink. (See Fig.10) (2) From the reverse side of the main board, remove the two screws M attaching the heat sink. (See Fig.11) 2.10Removing the center amp. board, front amp. boards (L/ R) and rear amp. boards (L/R) (See Figs.10 and 12) � Prior to performing the following procedure, remove the top cover and main board. (1) Remove the ten screws L attaching the heat sink. (See Fig.10) (2) Remove the four screws N attaching the heat sink. (See Fig.12) (3) Disconnect the center amp. board from the connector CN321 on the main board. (See Fig.12) (4) Disconnect the front amp. board (L) from CN311 on the main board. (See Fig.12) (5) Disconnect the front amp. board (R) from CN312 on the main board. (See Fig.12) (6) Disconnect the rear amp. board (L) from CN331 on the main board. (See Fig.12) (7) Disconnect the rear amp. board (R) from CN332 on the main board. (See Fig.12) the connector the connector the connector
Heat sink
L
Main board
L
Fig.10
Heat sink
M
the connector
M
Main board
Fig.11
Front amp. board (R) Rear amp. board (L) Front amp. board (L) Rear amp. board (R) Heat sink Center amp. board
N
CN332 CN331 CN312 CN311
Fig.12
N
CN321 Main board
(No.22037)1-7
|
|
|
> |
|
