|
|
|
Who's Online
There currently are 5766 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Sono molto soddisfatto e, quando mi necessiterà, mi avvarrò nuovamente di questo servizio!
;
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
;
SCANNING OF HIGH QUALITY
VERY, VERY HIGH VELOCITY DOWNLOAD
VERY GOOD PRICE,
TRUE SATISFIED, THANKS
;
Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
;
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
Receiving Radio Broadcasts
You can browse through all the stations or use the preset function to go immediately to a particular station.
Setting the AM Tuner Interval Spacing
Some countries space AM stations 9 kHz apart, and other countries use 10 kHz spacing.
Using Preset Tuning
Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 30 FM and 15 AM stations.
On the front panel ONLY:
To select the 10 kHz interval: Be sure the receiver is turned off, but is plugged into an AC outlet. Hold down FM/AM TUNING 5 and press STANDBY/ON . Now the 10 kHz interval is selected.
FM/AM TUNING
STANDBY
To store the preset stations
Before you start, remember... � There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.
On the front panel ONLY:
and
STANDBY/ON
1. Tune in the station you want to preset (see �Tuning in Stations Manually�).
If you want to store the FM reception mode for this station, select the FM reception mode you want. See �Selecting the FM Reception Mode� on page 17.
ANALOG SPK
L R
To change back to the 9 kHz interval: Be sure the receiver is turned off, but is plugged into an AC outlet. Hold down FM/AM TUNING � and press STANDBY/ON . Now the 9 kHz interval is selected.
FM/AM TUNING
STANDBY
TUNED
VOLUME
2. Press MEMORY.
and
STANDBY/ON
SPK ANALOG
L R
MEMORY
TUNED
VOLUME
CH-
Tuning in Stations Manually
On the front panel ONLY:
�CH-� appears and the channel number position starts flashing on the display for about 5 seconds.
FM/AM
1. Press FM/AM to select the band (FM or AM).
� Each time you press the button, the band alternates between FM and AM.
SPK ANALOG
L R
3. Press FM/AM PRESET 5/ � to select a channel number while the channel number position is flashing.
SPK ANALOG
L R
FM/AM PRESET
TUNED
VOLUME
TUNED
VOLUME
CH-
2. Press FM/AM TUNING 5/ � until you find the frequency you want.
� Pressing FM/AM TUNING 5 increases the frequency. � Pressing FM/AM TUNING � decreases the frequency.
FM/AM TUNING
Note:
You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are activated for the tuner, not for the CD and others. (See page 26.)
4. Press MEMORY again while the selected channel number is flashing on the display.
MEMORY
Notes:
� When you hold FM/AM TUNING 5/ � in step 2, the frequency keeps changing until a station is tuned in. � When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display. � When an FM stereo program is received, the STEREO indicator also lights up.
The selected channel number stops flashing. The station is assigned to the selected channel number.
SPK ANALOG
L R
TUNED
VOLUME
CH-
5. Repeat steps 1 to 4 until you store all the stations you want.
To erase a stored preset station Storing a new station on a used number erases the previously stored one.
16
English
|
|
|
> |
|
