Genuine Toshiba owner's manual. Couldn't really ask for more. And written in understandable English in contrast to a few recent experiences I have had with manuals for other equipment other than Toshiba but made in China and written in "Chinglish"!
I purchased a vintage Sony mixer off eBay and within the hour was able to locate and purchase the manual for it.I mean really,where else can you find a manual for a product made in 1983!? It was easy to find and purchase/download the manual I needed.I will use this site again for other equipment I have! Great site!
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Text excerpt from page 33 (click to view)
Activating the Sub-Room Front Speakers
This section is NOT applicable to those who connect the subroom front speakers to the SUB ROOM PREOUT jacks using another amplifier (see page 17). Before you start, remember... � When shipped from the factory, both pairs of the front speakers have been set to be used in the main room. To use the front speakers connected to the FRONT 2/SUB ROOM SPEAKERS terminals in the sub-room, see �Preparing for the Sub-Room Operations�SUB ROOM� on page 40.
Muting the Sub-Room Sound
From the remote control ONLY:
Press MUTING to mute the sound through the sub-room front speakers.
MUTING
SPEAKERS
1
SUB ROOM
On the unit ONLY:
The volume level indicator goes off.
SPEAKERS 2 / SUB ROOM
Press SPEAKERS 2/SUB ROOM to activate the sub-room front speakers.
The SUB ROOM speaker indicator lights up on the display.
To restore the sound, press MUTING again so that the volume level indicator appears on the display. � Turning MASTER VOLUME on the unit or pressing VOLUME +/� on the remote control also restores the sound.
Lights up
SPEAKERS 1 SUB ROOM
SPEAKERS
1
SUB ROOM VOLUME
VOLUME
dB
dB
To deactivate the sub-room front speakers, press SPEAKERS 2/SUB ROOM again. The SUB ROOM speaker indicator goes off.
Note:
Sounds through the sub-room speakers connected to the SUB ROOM PREOUT jacks are also muted.
Note:
If the center speaker or surround speakers are used for the Surround/ DSP mode (see pages 46 and 50) for the main room operations, the SPEAKERS 2/SUB ROOM button does not work.
For those who connect the sub-room front speakers to the SUB ROOM PREOUT jacks using another amplifier (see page 17). You have to determine how to adjust the volume level through the sub-room front speakers. (See �Preparing for the Sub-Room Operations�SUB ROOM� on page 40 for more details.) To use the sub-room front speakers 1 Turn on the other amplifier connected to the SUB ROOM PREOUT jacks. 2 Adjust the volume level of sub-room front speakers either on the other amplifier or on this receiver (depending on the SUB PREOUT setting on the SUB ROOM submenu).