There are currently no product reviews.
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
Great to be able to set channels again, on an old but stoll fine working TV
Good quality instructions manual. Very useful to me. Quick and excellent service from Owner-Manuals... Thanks !!!
Sono molto soddisfatto e, quando mi necessiterΓ , mi avvarrΓ² nuovamente di questo servizio!
A comprehensive Operating and Service Manual. All schematics are complete and easy to read. The PCB drawings and complete parts list are very helpful. I would definitely recommend this manual.
Adjusting the Volume
On the unit: To increase the volume, turn MASTER VOLUME clockwise. To decrease the volume, turn it counterclockwise. â¢ When you turn MASTER VOLUME
Activating the Front Speakers
When you have connected two pairs of the front speakers, you can select which to use. IMPORTANT: Down Up
You can activate two pairs of the front speakers at the same time only when the SPEAKER LOAD SELECTOR switch on the rear panel is set to the âHIGHâ position and when signals are sent only to the front speakers. Otherwise, activating one pair of the speakers deactivates the other.
rapidly, the volume level also changes rapidly. â¢ When you turn MASTER VOLUME slowly, the volume level also changes slowly.
From the remote control: To increase the volume, press VOLUME +.
To decrease the volume, press VOLUME â.
On the unit ONLY:
To use the speakers connected to the FRONT 1 SPEAKERS terminals, press SPEAKERS 1 (inside the front door) so that the speakers 1
Always set the volume to the minimum before starting any source. If the volume is set at a high level, the sudden blast of sound energy can permanently damage your hearing and/or ruin your speakers.
indicator lights up on the display. (Make sure that the front speakers 2 indicator is not lit on the display.) To use the speakers connected to the FRONT 2 SPEAKERS terminals, press SPEAKERS 2 (inside the front door) so that the front speakers 2 indicator lights up on the display. (Make sure that the front speakers 1 indicator is not lit on the display.) To use both sets of the speakers, press SPEAKERS 1 and SPEAKERS 2 so that the front speakers 1 and 2 indicators light up on the display. To use neither sets of the speakers, press SPEAKERS 1 and SPEAKERS 2 so that the front speakers 1 and 2 indicators disappear from the display. (âHEADPHONEâ appears on the unitâs display).
â¢ The volume level can be adjusted within the range of ââ â â dBâ (minimum) to â+18.0 dBâ (maximum). â¢ If you set One Touch Operation to âONâ (see page 33), you do not have to adjust the volume level each time you change the source. It is automatically set to the stored level. (However, if you have turned off the receiver with the volume level set at more than level ââ35 dB,â the volume level will be automatically set at level ââ35 dBâ next time you turn on the receiver.)
In the following cases, the speakers connected to the FRONT 2 SPEAKERS terminals are deactivated even if both pairs of the front speakers are activated. â If you select âDVD MULTIâ as the source. â If you select any of the Surround/DSP modes which activates the center and/or surround speaker(s).
Listening only with headphones:
Sounds through the front speakers and the subwoofer shut off when connecting a pair of headphones to the PHONES jack. (âHEADPHONEâ appears on the unitâs display.) You can enjoy the following sounds through the headphones: â¢ If the Surround mode is activated, you can enjoy surround effect. (For details, see â3D HEADPHONE Modeâ on page 40.) â¢ If a DSP mode is activated, you can enjoy the DSP effect. (For details, see âHEADPHONE Modeâ on page 44.) CAUTION:
Be sure to turn down the volume before connecting or putting on headphones, as high volume can damage both the headphones and your hearing.