Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Manual was complete and available promptly, since I had lost my original manual. Very good response.
Text excerpt from page 25 (click to view)
Basic operations
Adjusting the output level of the subwoofer
You can adjust the output level within the range from �10 to 10. On the remote control:
Changing the decode mode
When you play a disc (or software) encoded with Dolby Digital or DTS Digital Surround, the following symptoms may occur; � Sound does not come out at the beginning of playback. � Noise comes out while searching for or skipping chapters or tracks. In these cases, change the decode mode to �DOLBY D� (for Dolby Digital) or �DTS� (for DTS Digital Surround). 7 When DVD or AUX DIGITAL is selected as the source On the remote control:
Press S.WFR +/�.
NOTE
� You can also make adjustments using the choice menu shown on the TV screen. (A pg. 54) � The adjustments on a source take effect for the other sources.
Adjusting the bass/treble sound
You can adjust each enhancement level from the front speakers within the range from �10 to 10. On the remote control:
Press DECODE to select the decode mode.
The current decode mode appears on the display window. Example: When �AUTO/PCM� is selected.
Press BASS +/� for bass sound. Press TREBLE +/� for treble sound.
NOTE
� You can also make adjustments using the choice menu shown on the TV screen. (A pg. 53) � The adjustments on a source take effect for the other sources. � You can adjust bass/treble enhancement level only for front left/right channel. However, the supplied speakers cannot add the effective change to the bass sound because of their cutoff frequency even if the bass sound adjustment is made. (A pg. 54) To change the bass enhancement level more efficiently, adjust the output level of the subwoofer. (A �Adjusting the output level of the subwoofer�) (When you change the front speakers to the larger ones and select �LARGE� for the front speakers in the SIZE sub-menu (A pg. 54), the effective adjustment of bass sound is also possible by pressing BASS +/�.)
Each time you press the button, the decode mode changes as follows;
] AUTO/PCM ] DOLBY D ] DTS ] (back to the beginning)
� AUTO/PCM: Normally select this. The system automatically detects the incoming signals. � DOLBY D: Select this if the symptoms above occur when playing a disc (or software) encoded with Dolby Digital. � DTS: Select this if the symptoms above occur when playing a disc (or software) encoded with DTS Digital Surround. NOTE
� When �DOLBY D� or �DTS� is selected, if a signal encoded with another digital format comes in, you cannot listen to the sound. (The GDIGITAL or C indicator flashes.) � Changing the source returns the decode mode to �AUTO/PCM� automatically.
