perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 19 (click to view)
Connections & Installation (continued)
Installing the Ceiling Mount
2 Fasten the ceiling mount to the ceiling
â Attachment of a recessed cover in the ceiling (recess bracket) may be mandatory in certain regions. If this is so, ensure that the recessed cover (recess bracket) is securely attached before installing the camera. â Please refer to the instruction manual of the cover in use for details on installation of the recessed cover (recess bracket). â For more detail, please contact the JVC dealers.
Align the ADFRONT markB to the front direction that the camera is facing, and fasten the ceiling mount to the ceiling using the 4 screws while paying attention not to catch the connection cables. Use M4-sized (No 8) screws or bolts. For woodscrews, make use of those with a diameter of 4.1 mm.
Embedded Cover Ceiling (recess bracket)
1 Attach the Safety Wire
Connect the ceiling slab or channel to the ceiling mount using a safety wire to prevent the camera from falling down. Make use of the Safety Wire Mounting Hole to connect the ceiling mount and the wire. (Refer to diagram below.)
DFRONT Mark Attach to Ceiling Slab or Channel Direction camera is facing Screws
â Be sure to use 4 screws and attach them firmly. â The sheet attached to the ceiling-mount screw holes of the ceiling mount acts as an insulator between the ceiling mount and the ceiling structure. If the ceiling structure is made of a metallic material, improper insulation with the camera may cause noise interference in the images. To prevent this from occurring, ensure proper insulation during installation.
Safety Wire Safety Wire Mounting Hole
Choose a wire and ceiling structure with an appropriate length and strength that may prevent danger in case the camera falls down. MEMO
â Connect the wire in such a way that it can be insulated from the ceiling structure. If the ceiling structure is made of a metallic material, improper insulation with the camera may cause noise interference in the images. â Safety wires are not provided. Please purchase commercially available wires separately.