There are currently no product reviews.
This manual provided the necessary information to properly use the C-3 deck. The manual was an excellent reproduction and very clear.
Product was very good. Received quickly and complete
Although printing quality is not the best, the manual was very helpful in order to reactivate this ancient but still good electronic musical instrument.
as a first-time user and buyer from this site, i found the overall service outstanding!! this product is a godsend as, without it, i would never have been able to find my way around and use my machine as intended. i will certainly use this site again as required. many many thanx!!
This manual is exactly what I needed. This site always has every manual I need, and it is also much less expensive then most other sites. This is the only manual site I will use.
4. Press VOLUME/SELECT buttons to adjust the 00 ~ 50 16 Main power switch 18 Power cord
In North America (USA and Canada), this monitor comes
VOLUME : 20
Press switch to turn main ON OFF. Connects the provided power cord (120 V AC or speaker volume. When main is ON, power indicator on 230 V AC, 50 Hz/60 Hz) to the AC IN connector Press this button to display speaker volume level on the &. front panel lights in orange and monitor enters the screen. VOLUME/SELECT stand-by mode. + : The Built-in speaker volume is increased. (00 = 50) dom, two power cables are provided (one for use in * The on-screen display goes off when you press MENU button.
I ON OFF â : The Built-in speaker volume is decreased. (50 = 00) with one power cable. In Europe and the United King-
* Screen indication will disappear about 10 seconds after operating.
continental European countries and other for the UK). â +
17 AC inlet [AC IN]
qualified service personnel to obtain the correct type of 1. Press select buttons corresponding to the item power cable. you want to adjust.
CHROMA CONTRAST The item you select is displayed on the screen. PHASE BRIGHT 3 Contrast control : Press the CONTRAST/BRIGHT button once.
Power input connector. Connect the provided AC power Be sure to use power cable that is appropriate for the cord to an outlet (120 AC or 230 V AC, AC outlets used in your region. If none of the power * 50 Hz/60 Hz). cables provided is suitable, please contact your dealer or
1 Chroma control : Press the CHROMA/PHASE button once. 2 Phase control : Press the CHROMA/PHASE button twice. 4 Brightness control : Press the CONTRAST/BRIGHT button twice.
* Pressing the CHROMA/PHASE and CONTRAST/BRIGHT button alternately while item is shown on screen restores the previous status. When no item is shown on screen, CHROMA and CONTRAST have priority. PHASE : 00
2. Adjust with the VOLUME/SELECT buttons. Notes:
VOLUME/SELECT â +
Items NTSC color system mode. CHROMA receiving B/W or when no signal is
input. â Phase control is effective only in the VOLUME/SELECT button â Chroma control is not effective when
lighter deeper (Chroma) PHASE â When CHROMA is adjusted to ââ40,â CONTRAST BRIGHT
* Screen indication will disappear about 10 seconds after operating. * The on-screen display goes off when you press MENU button.
reddish greenish (Phase) the picture becomes less colorful. lower higher 3 seconds) when your selected (Contrast) darker brighter (Brightness)
â âNO EFFECTâ is displayed (for about function has no effect.
CONTROLS AND FEATURES (contâd) HOW TO HANDLE BASIC OPERATIONS REAR VIEW
STATUS indication (PAL or NTSC)
<Rear Panel> BASIC OPERATION
1. Press main power switch to turn on the power. 2. Press POWER switch to turn on the power. PAL
ON : Power turns ON. (Power indicator: lit)
18 Green: The main power is ON, and the monitorâs
POWER To AC outlet
power is ON (in the normal operation mode).
(120 V AC, For U.S.A. and Canada 50 Hz/60 Hz) Orange : The main power is ON, but the monitorâs
OFF : Power turns OFF. (Power indicator: unlit) power is OFF (in the standby mode)
To AC outlet Unlit : The main power is OFF.
IN Y/C OUT
50 Hz/60 Hz)
power or select inputs, the color INPUT Terminals on the rear panel system indication appears for about
to AUTO mode, when you turn on the panel. The selected button lights in green.
SELECT 3 seconds on the screen while PAL or
1 Input A It does not appear when receiving a 2 Input VIDEO B terminal Refer to page 8 for more information
(VIDEO Y/C) AUDIO B terminal about COLOR SYSTEM setting and VIDEO B (Y/C) terminal page 9 for more information about
Note:The Y/C (S-video) terminal has priority.
buttons Video Audio signal input 18 NTSC signals are being detected. (VIDEO) For the United Kingdom B/W or when no signal is input. VIDEO AUDIO A terminal
STATUS indication setting.