I PURHASED THIS PRODUCT BECAUSE I WAS HAVING PROBLEMS WITH MY CDR20 HARMAN KARDON RECORDER. WHICH I PURCHASED NEW 12 YEARS AGO. AFTER REVIEWING THE MANUAL, I WAS ABLE TO ADJUST THE TENSIONER IN THE SYSTEM. WORKS LIKE A CHAMP!.
SAVED ME AT LEAST 100.00 WHICH WAS WHAT A SERVICE REPAIR STATION WANTED. GREAT MANUAL EASY TO READ. SPECIALLY AFTER I PRINTED THE PAGES WHICH DEALT WITH MY RECORDER. THANKS A LOT!!!!!!!!
I have never bought a service manual which is as competely readable as this althogh it was a scanned pdf. Thank you for this succesful manual also cheaper than other sites.
Text excerpt from page 10 (click to view)
Removing the main board / heat sink (See Fig.13 to 15)
Prior to performing the following procedure, remove the metal cover, the rear cover, the CD mechanism assembly and the rear panel. 1. Disconnect the card wire from connector CN900, CN901 and CN931 on the main board. Disconnect the wire from CN906 and FW903 respectively. 2. Disconnect the wire from W950 on the underside of the main board.
CN931 CN901 CN900 Main board
Fig.13 3. Remove the two screws I attaching the main board to the chassis on the left side ofthe body and disengage the two joints c. 4. Remove the two screws J attaching the heat sink to the main board.