|
Who's Online
There currently are 5954 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Simple and fast...
The diagrams are clear and legible; i have been a great help.
The site is very reliable and precise thanks.
;
Very easy site. Great service and quick release for download. Manuals are of good quality.
Joop - The Netherlands
;
Very good manual, in depth and complete. Only criticism is that some of the circuit diagrams are slightly blurry and hard to follow for long periods of time, but this is to be expected. Perfect for any maintenance required. Also contains the wiring diagrams of the control cable for constructing extensions.
;
Received a quick response, material was exactly what it was supposed to be. The service did everything I expected it to do. would use service again.
;
Detailed SONY CFD980 Service Manual at an easy to find one stop shopping. Make my radio hobby technically interesting. Thanks.
3.1.4 Removing the rear cover (See Figs.11 and 12) � Prior to performing the following procedures, remove the side panels L/R and top cover. (1) From the left side of the main body, cut off the tie band attaching the barrier. (See Fig.11) (2) Disconnect the wire from the connector CN760 on the main board. (See Fig.11) (3) From the back side of the main body, remove the twelve screws J and screw K attaching the rear cover. (See Fig.12) (4) Remove the rear cover from the main body.
Wire
CN760
Tie band
Main board
Rear cover
Barrier Fig.11
J
J
Rear cover
K
3.1.5 Removing the fan (See Fig.13) � Prior to performing the following procedures, remove the side panels L/R, top cover and rear panel. (1) From the inside of the rear cover, remove the two screws L attaching the fan to the rear cover. (2) Take out the fan from the rear cover. Reference: After attaching the fan, pass the wire through the slots e and fix the wire with the spacer.
J
Fig.12
L
Slots e
Wire Fan Spacer
Rear cover
Fig.13
1-10 (No.MB230)
|
|
|
> |
|