Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Text excerpt from page 26 (click to view)
When there is a problem with the tint.
Â·Check the color adjustments of the display and video card.
The tint may vary slightly depending on the display monitor and the video card of the PC. The tint may be improved by adjusting the color setting of the monitor. Depending on the video card, the color may also be adjusted by selecting Display Properties (right click on the desktop).
Â·Switch to True Color (24 bit)
Reproduction of natural colors becomes difficult when the PC is set to High Color (16 bit) or lower. It is recommended that the PC is set to True Color.
Â·Adjust WB-Red and WB-Blue
It is also possible to adjust the tint using the WBRed and WB-Blue in the Image quality adjustment screen.
Â·Turn Full Auto off then turn it back on
When shooting scenes with different light sources (for example alternately switching between an outdoor scene under sunlight and indoor scene under fluorescent lighting), the automatic white balance tracking may take some time to operate. In this case, check off Full Auto and check it again for immediate operation of the automatic white balance tracking.
The image size changed automatically.
When the same VN-C1U is connected to multiple PCs, the PC used to set or control VN-C1U last has priority over the remaining PCs.