|
Who's Online
There currently are 5631 guests and 2 members online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I purchased a copy of my old JVC VCR Service manual from Owner-Manuals.com
The copy was complete and valuable to me.
I was able to fix my VCR - it had a bad belt.
I am glad I found Owner-Manuals.com
Great Price. Thanks
;
Great service! I got manual to my sony receiver for very reasonoble price.
;
Good service, well organized. Cheap, and the service manual was as expected. A valuable service for those of us wanting to keep the old junk going!
;
The manual arrived very quickly and had all the information I needed - Very satisfied with this seller. - Thanks -
;
Good quality, the manual help me to repair the echo/reverb section
VS-DT7R 2.1.8 Removing the main board (See Figs. 2-10 and 2-11.) � Remove the top lens. [VS-DT9R only] � Remove the bottom panel. � Remove the top panel. � Remove the CD mechanism assembly. � Remove the front panel assembly. � Remove the tuner board. � Remove the speaker board. (1) Disconnect the wire from connector CN192 on the power amplifier board. (2) Disengage the wire clamp bundling the wire of the power transformer. (3) Disconnect the wires from connectors CN181, CN191 and CN194 on the main board. (4) Remove the screw J, which retains the main board, together with the wire holder. (5) Remove the three screws K and screw K' attaching the main board. (6) Remove the two screws L attaching the main board and then remove the rear panel. (7) Take out the main board from the bottom chassis. [Reference]Attaching the main board � When attaching the screw K', attach the earth wire of the main board at the same time. � When attaching the screw J, also attach the wire holder together with it. � After connecting the wires to the connectors CN192 and CN193 on the power amplifier board, bundle them using wire holder. 2.1.9 Removing the power amplifier board (See Fig. 2-12.) � Remove the top lens. [VS-DT9R only] � Remove the bottom panel. � Remove the top panel. � Remove the CD mechanism assembly. (1) Disconnect the wires from connectors CN192 and CN193 on the power amplifier board. (2) Remove the two screws M attaching the fan motor. [Reference] � It is not necessary to remove the wire from the fan motor. (3) Remove the two screws N attaching the power amplifier board. (4) Lift the power amplifier board, disengage the hook e from the heat sink of the main board and take out the power amplifier board. Fig.2-12
Fig.2-10
Fig.2-11
9
$4.99 VS-DT7R JVC Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
|
|
> |
|