There are currently no product reviews.
This manual covers the main equipment features only. While it also includes the procedure for saving and loading from the now long obsolete memory cards it does not mention the how to operate with the optional floppy drive interface so I am still at a loss about how to use this! Note that there is a separate manual covering the MIDI interface and programming via the keyboard, not included in this download. You will also need to get hold of this if you want to use the MIDI interface properly. Basically there is little difference between this manual and the free to download manual for the similar PR60 model.
Good list of manuals. I found a very rare one and easily get. Should be promptly to download, as we must to wait hours even after confirmed payment.
The manual was properly scanned and perfectly readable. The only small problem is that I couldn't use my dear Ctrl + F to find a word I needed.
Nothing wrong with the manual or the delivery - came to me the same day I ordered it. But afterwards I realized that I ordered the wrong manual. Probably better with the Quick start - version. So maybe it would be better if we could see a list with inhold for each manual before ordering?
Bought T4850 High End Tuner a few years ago, but i didn't know where all the buttons were used for. So i purchased the owners manual. Perfect! Just what i needed.
Installation and Connection (WB-1540)
Disassembling the Housing
Main Housing Unit
Dismantle the gasket and gasket gland
Loosen the 6 Screws B (M4) using a driver, followed by dismantling the gasket and gasket gland from the lower housing. T The 6 Screws B (M4) cannot be totally removed from the gasket to prevent it from falling off.
Dismantle the lower housing
Loosen the 3 Screws A (M4 x 6) using a driver, followed by dismantling the lower housing from the main housing unit. T The lower housing is connected to the main housing unit using a safety wire.
Screw A (M4 x 6) x 3 Lower Housing Safety Wire Gasket
CAUTION: Pay careful attention to store the dismantled parts and screws until assembly is complete to prevent them from being misplaced.
Screw B (M4) x 6
Mounting the Camera (TK-C625)
Interior of Housing
JVC Mark Notch
Before mounting. Remove the ceiling mount cover of the camera and guide the cables supplied with WB-1540 through the cover. T For further details, please refer to the instruction manual of the camera in use.
Camera Mounting Bracket
Connect the AC 24 V output cable to the camera
Connect the AC 24 V output cable of the main board to the cameraâs ceiling mount bracket.
Connect other cables
Connect the necessary cables supplied with the housing (coaxial video cable, communication cable, etc.) to the ceiling mount.
Safety Wire Main Board Cables Cover FRONT Mark
CAUTION: â Connect the communication cable to the [ALARM IN/OUT] and [CONTROL] terminals if necessary. For safety reasons, ensure to cut off any excess cable and bind using an insulating tape before use. â For further details on connection, please refer to the instruction manual of the camera in use. â Ensure to bind connectors of LAN cables and DC 12 V Power Cable that are not in use with an insulating tape before use.
AC 24 V Output Cable
To [POWER INPUT AC 24 V] Terminal of Ceiling Mount
Mount the cameraâs ceiling mount to the main housing unit.
Use the 4 screws supplied (M4 x 20) to mount the ceiling mount to the main housing unit.
Screws Supplied (M4 x 20) x 4
NOTE: During mounting, align the [D FRONT] Mark of the ceiling mount with the notch on the camera mount bracket of the main housing unit.
Mount the camera to the ceiling mount
Follow instructions in the manual of the camera in use to mount the camera to the ceiling mount.