|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Hi
First, thank you very much for the fast delivery.
I'm really satisfied with your manual. I could find everything, I needed.
I appreciate your service.
Regards from Germany PB
;
Everything you need: schematic, circuit explanation, operating/testing instructions. Awesome.
;
Correct and accurate service manual for that Siemens (Nordmende) TV. Price is worthwhile as the Manual is fully usable.
;
Just what I needed to repair my CT-F600, clear pdf, easy to tread and navigate
;
Yes, cost is low. And quality of some diagrams is low too.
XM-PX33BU/XM-PX33WT
<Removal of the MD mechanism>
Removing the spindle motor (See Fig.9)
1. Unsolder the part e of the flexible wire extending from the underside of the chassis assembly to the spindle motor. At this time, do not spill flux on the gear and others. 2. Remove the three screws G attaching the spindle motor and detach it from the chassis assembly.
Slit washer Worm gear
H
Shaft holder e
G
chassis assembly
Spindle motor f g Pickup unit
Removing the pickup unit (See Fig.9)
1. Remove the slit washer and the worm gear from the underside of the chassis assembly. 2. Remove the screw H then detach the shaft. attaching the shaft holder,
Lead screw
Fig.9
3. Pull out the part f and g in the directions of the arrows to remove the pickup unit and the lead screw.
Lead screw
I
Lead spring
Removing the pickup (See Fig.10 and 11)
1. Remove the screw I attaching the lead spring, then detach the lead spring. 2. Pull out the shaft from the pickup. ATTENTION: When handling the pickup unit, touch the parts marked in Fig.11 only. Fig.10
Pickup
Touch the parts only.
Fig.11
1-7
|
|
|
> |
|