Great manual good quality really helped in the repair of my Toshiba, thanks
Text excerpt from page 8 (click to view)
Removing the feed motor (See Fig.12)
1. Peel off the part h of the flexible wire on the underside of the feed motor. 2. Unsolder the solder joint i connecting the flexible wire to the feed motor. 3. Peel off the part j of the flexible wire. 4. Remove the two screws J attaching the feed motor on the upper side of the chassis assembly. ATTENTION: When reassembling, reattach the flexible wire with an adhesive tape and solder the appropriate part.
Removing the switchi board assembly (See Fig.12)
1. Remove the switchi board assembly attached to the side of the chassis assembly with the double-sided tape. 2. When reassembling, reattach the switchi board assembly with an adhesive tape as before.