|
Who's Online
There currently are 6043 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
I was very skeptical of this website, I have never downloaded manuals before. I put it on the AMEX and payed through Paypal to ensure protection. I got the manual exactly as described and now I can replace the filter capacitor for this amp. Great Price, others selling for 12.99 or more and this is the same manual. I will search out this website for other manuals. Thank you
;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
;
It is OK, this manual help me to repair my dynacord
;
Good manual. Even it is an old printed manual, it is well scanned and complete, with all drawings, schematics and parts list. Very good return for the cost.
;
I'm very satisfied with my purchase. It resolved my problem. Owner-manuals.com is a very very good place.
Thank you!
XV-M512SL 4.3 Flap adjustment of the pick-up guide shaft Note: When replacing a pickup etc., execute the following adjustments 4.3.1 Pickup replacement (1) When removing the traverse mechanism from the changer mechanism unit, move the pickup to the innermost diameter of the disc and set switch (S11) on the pick-up board on �SHORT� side, please before removing the card wire from connector (CN10) (2) Take out the traverse mechanism. (3) First short-circuit the pickup circuit before removing the pickup. Then carry out the replacement.
4.3.2 Jig setup (1) Remove the rubber cushion from each of the four corners of the traverse mechanism. (When installing be sure not to make a mistake with the cushion colors). (2) Install the jig stud. (3) Make a jig clamp. (Remove the clamp from the set and assemble it as shown in the diagram below. Note: How to handle the pickup To protect the pickup from electro-static damage, make sure to hold it by the die-cast chassis (optical base). And make sure that pickup lens do not touch the top cover.
23
|
|
|
> |
|