There are currently no product reviews.
Perfect for my use.Could have better pictures,but otherwise perfect ;)
This is one of four manuals I have downloaded recently.
Purchase was very straight forward and the authorising email arrived in about 4 hours.
The quality of the scan is good. Print is clear and square to the page edges.
Exactly as advertized. High quality digital copy of the Nak 610 user manual. Easy download and access. Highly recommended.
The manual was exactly what I wanted and I found it nowhere else. Thanks!
Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
To connect to a TV with the SCART connector
You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear audio sound with better quality, connect the audio output to your audio equipment.
Y/C - COMP switch . SCART cable (not supplied)
CENTER RIGHT LEFT REAR
AV COMPU LINK
VIDEO OUT AV
PCM / STREAM RIGHT LEFT FRONT OPTICAL COAXIAL S-VIDEO
IN S-VIDEO VIDEO
Set the Y/C - COMP switch correctly according to your TV. . â¢ If the TV only accommodates the composite video signal, set the switch to âCOMP.â . â¢ If the TV accommodates the Y/C signals, set the switch to âY/Câ so that you can enjoy better-quality pictures. â¢ If the TV accommodates the RGB signals, set the switch to âCOMP , as well as make the unit feed the RGB signals by .â following the procedure shown below.
How to make the unit feed the RGB signals
The unit cannot output the RGB signals from the SCART connector and the S-video (Y/C) signals from the S-VIDEO jack simultaneously. In the initial (factory-preset) condition, the S-VIDEO jack is active, while the RGB signals cannot be output. To make the unit feed the RGB signals, follow the procedure below. Note that the S-VIDEO jack does not feed correct signals when the unit is set to output the RGB signals. Â¶ When the unit is turned on
1 Set the Y/C - COMP. switch to âCOMP.â . 2 Press and hold down the 7 (STOP) button on the front panel when no disc is inserted or while the unit is stopped.
âS-VIDEOâ appears in the display window after a few seconds.
LPCM MPEG DOLBY DIGITAL DTS
TITLE TRACK CHAP
1 A -B