|
Who's Online
There currently are 365 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
I received a good service manual, with good resolution. Improve the instructions for the purchase because they are not well understood.
For the rest, so good.
Thanks Angel.
 ;
Very good documentation for the Grundig 2077 model (as well as similar 800/900/1000 series radios). The first two pages are a summary of reception specifications and output capability. The third page is the tuner dial indicator and dial cord routing diagram. the final ~5 pages are the schematics for the various models (including 2077). The scan quality of the schematics are good, adn can be easily read if zoomed in. The documents are in German, not English as stated. It would have been nice to have the tuning sequence and settings, and some trouble shooting materials... or component and wiring map.
 ;
Perfect like it was descriped, Perfect like it was descriped
 ;
Very good detail, all pages clear, exactly what I needed
 ;
Excellent service, and just what I needed to service my TU-7700. All pages of the manual are clear and easily readable.
XV-SA70BK/XV-SA75GD
Removing the rear panel (see Fig.6)
*Prior to performing the following procedure, remove the top cover. 1.Remove the twelve screws E attaching the rear panel on the back of body. E
Removing the front panel assembly (see Fig.7,8)
* Prior to performing the following procedure, remove the top cover. * There is no need to remove the mechanism assembly. 1.Remove the one screw F attaching the front panel assembly on the bottom chassis. 2.Remove the four screws G attaching the foot on the bottom chassis. 3.Disconnect the wire from CN3, JT102 and JT202 on the main board respectively. 4.Hook c and d are removed respectively, and the front panel assembly is removed.
E
E
E Fig.6 G Foot
E
Hook d
G
Hook c
F
Hook d
Foot Fig.7
Removing the main board (see Fig.9)
* Prior to performing the following procedure, remove the top cover, surround audio board, mechanism assembly and rear panel. CN3 1.Disconnect the wire from CN3, JT102 and JT202 and on the main board respectively. 2.Remove the four screws H attaching the main board on the bottom chassis. Fig.8 H JT102 JT202
JT202 JT102
H CN3 H H
Fig.9
1-7
|
|
 |
> |
|